Viimeisimmät tuotteet
Contact Us
- Neljäs kerros, - A3 -vyöhyke, ilmailumahdollisuus, Dongli Discct, Tianjin, Kiina.
- >SalesManager@coilwinding
Machinechina.com - +8613072088960
4-station Full Automatic 4-station Internal Winding Machine
3. Technical requirements for stator winding1.1. Workpiece descriptionA total of 1 product workpiece stator, respectively: outer diameter inner diameter stack height (not including the frame)1.120mm86mm28mm (The outer diameter is the same, but the stack height can be adjusted.)3.1.1 For winding requirements, please refer to Party A's drawings. The dimensions are designed with reference to the samples provided by Party A. (Party B is only responsible for the sample size. If it is involved in a situation that is inconsistent with the sample size, Party B will not bear the corresponding responsibility, but the height can be adjusted. ).3.1.2 The test after the equipment is wound meets the salt water pinhole test requirements of Party A (3 meters not more than 1 point), and the qualified rate of finished products is 100 percent within the allowable range of the parameters.
Kuvaus
NAME:GW-IN200-4 Full automatic 4 station internal winding machine
SPECIFICATION
Winding number | 4 | Counting accuary | 0.5turns |
Model | GW-IN200-4 | Line accuary | 0.01mm |
Max speed | 600rpm/min | Control number | 5 Axis Yaskawa Servo Control |
Optimum winding diameter | 0.05mm-1.2mm | Machine power | 11KW |
Line accuracy | 0.01mm | Work pressure | 0.4-0.7Mpa |
Stator slot number | 2,3,4,6,8,9,12....... | Input power | AC380V 50/60HZ |
Applicable stator inner diameter | Greater than or equal to 10mm | Machine weight | 1000KGS |
Applicable stator outside diameter | Less than or equal to 120mm | Overall dimensions | 150012001950MM |
Apply iron core stack height | Less than or equal to 100mm |
Features :
1. The wire can be wound on any track by moving the wire mouth up and down and rotating the iron core. Therefore, by changing the computer winding program to correspond to different core stack thickness and different core pole number of winding. 2. Any abnormal operation, failure state to man-machine dialogue mode prompt operation, maintenance.
3. The number of winding loops can be set arbitrarily in the way of thread, and the specified 360 degrees can be stopped at any position, so that the wire passing is simple and convenient and the overall production efficiency is shortened.
4. When winding, the number of coils can be changed flexibly in each layer to realize different types of products.
5. Product programming is simple and convenient, with a unique special software, unlimited upload download storage. Easy to master with simple training.
6. Due to the high-performance control system and Servo Motor, it can ensure the stability of the position of the wire and shorten the time. Kill.
7.According to customer requirements can choose manual or automatic manipulator loading and unloading mode.
8. Each unit has been standardized, easy to replace and disassemble.
Suositut Tagit: 4-station full automatic 4-station internal winding machine, China, suppliers, manufacturers, factory, price, made in China
Accessories Model
NO. | NAME | MODEL | SPECIFICATION | BRAND |
1 | 400W Servo motor（2PCS） | 安川 | ||
2 | 3000W Servo motor（2PCS） | 安川 | ||
3 | 4000W Servo motor（1PCS） | 安川 | ||
4 | 400W Servo controller（2PCS） | 安川 | ||
5 | 3000W Servo controller（1PCS） | 安川 | ||
6 | 4000W Servo controller（2PCS） | 安川 | ||
7 | IO module（32IN 32OUT） | 安川 | ||
8 | M-3 Communication cable | 安川 | ||
9 | CPU module | 安川 | ||
10 | Base unit MBU304 (Single slot） | 安川 | ||
11 | Terminal station | 安川 | ||
12 | IO Cable | 安川 | ||
13 | Communication Servo CN1 plug | 安川 | ||
14 | Terminating resistor | 安川 | ||
15 | Touch screen | 10 inch | 威纶 | |
16 | Intermediate relay | 施耐德 | ||
17 | Relay base | 施耐德 | ||
18 | 24V Switching power supply | 施耐德 | ||
19 | Ac contactor | 施耐德 | ||
20 | C16 The circuit breaker | 施耐德 | ||
21 | C60 The circuit breaker | 施耐德 | ||
22 | Buttons | 施耐德 | ||
23 | Air source treatment element | 亚德客 | ||
24 | Electronic digital display pressure switch | 亚德客 | ||
25 | Induction switch | 亚德客 | ||
26 | Scissors cylinder | Diameter 32, stroke 10 | 亚德客 | |
27 | Scissor rising cylinder | Diameter 25, stroke 20 | 亚德客 | |
28 | Needle transfer cylinder | Diameter 16, stroke 100 | 亚德客 | |
29 | Mold cylinder | Diameter 40, stroke 15 | 亚德客 | |
30 | The electromagnetic valve | 3 links ,2 positions | 亚德客 | |
31 | Connector | 2 connecting piece | 亚德客 | |
32 | Tensioner | 亚博 | ||
33 | DC24V | 台邦 | ||
34 | Origin sensor | 欧姆龙 | ||
35 | Limit switch | 欧姆龙 | ||
36 | Second gear selector switch | 施耐德 | ||
37 | Green normally open button | 施耐德 | ||
38 | Red normally closed button | 施耐德 | ||
39 | Safety grating | DC24V | 德国劳恩 | |
40 | Screw | 台湾上银 | ||
41 | Guide | 台湾上银 | ||
42 | Transformer | 12KW | 中科 |
Saatat myös pitää
